[Updated] Install Android 4.1 JellyBean (Stable v4) on Micromax Funbook

Micromax Funbook P300 users rejoice!

We are finally going to share how you can install Android 4.1 JellyBean on Micromax Funbook P300.

The Android 4.1 JellyBean for Funbook P300 is actually based on CyanogenMOD 10. This is the successor to the one of the most famous and stable ROMs for Micromax Funbook P300, the CyanBook ROM for Funbook.

This ROM, as the title suggests is still in its Beta (and that too, in its first Beta) so you should not expect it to run perfectly there are still many bugs as it is based on CM10 nightly. But its worth checking out.

So, before installing this ROM lets take a look at some bugs and features of this ROM.

Bugs

Camera can crash at times.
No Hardware Acceleration.
USB will not auto mount. You have to do it manually(Method explained later).
Google TTS may crash occasionally.
Google Now might not stop listening to you. Solution is known and the dev is trying to implement it.
There are many more bugs as this is still a Beta version.

Features

Google Play Store support
Bluetooth USB dongle works
Support for PS3/ Xbox 360 and Generic Gamepads
USB Audio Support.
SmartAss V2 Governor
Apex Launcher
Kernel SamePage Merging (KSM) enabled Kernel
V6 supercharger and Adrenaline Scripts Included

So, in this post I will tell you how you can install Android 4.1 JellyBean on Micromax Funbook P300.

Requirements

A Micromax Funbook P300
CWM installed on your Funbook. [Install CWM on Micromax Funbook]
Installation ZIPs.
Hands and a working mind.

Download ZIPs

Download CyanBook JellyBean v2 Download JB Gapps

Move both the downloaded ZIPs in your external SD card. Don’t forget to insert that SD card in Funbook .

Installation

Okay so now comes the fun part. Follow the steps properly:

Reboot into CWM Recovery Mode. To reboot into recovery mode turn off your tab. Press the “Options button” and “Power Button” simultaneously.
Now I would suggest you to take a backup of your current ROM just in case you run into some trouble.
Now select “Wipe data/factory reset“. Let it complete.
Now go to Advanced > Wipe Dalvik Cache. Move to the next step when this is complete.
Now choose “Install ZIP from SD card” and choose the “CyanBook_JB_V4.zip”. Let it install.
After the above ZIP is installed properly again choose ”Install ZIP from SD card” and then choose “gapps-jb-20120726-signed.zip“. Let it install as well.
All done! Time to reboot.

Booting Up

It will take some time while its booting for the first time. After it boots up you will need to set it up. Just follow the steps and enter the required info that you are asked for. It will only take a minute or two.

All done? Great!

You just learnt how to install JellyBean on Micromax Funbook P300.

Snaps

Pictures are worth a thousand words so here are some screenshots so that you can see how your Funbook will look with JellyBean installed on it.

jellybean on micromax funbook

So there you go. You just learnt how you can Install Android 4.1 JellyBean on Micromax Funbook.

Changelogs

Change Log Beta 2 :

Now with Hardware acceleration.
No more double camera apps
Added file Manager
Updated CM 10 sources
CM10 Bootanimation

Change Log Beta 3 :

CM 10 sources have been updated.
Google Now should work now.
Option to switch to phablet mode. ( change ro.disable_phablet_ui= to 0 and reboot )
Battery % now works.

Change Log V 1 :

Apex launcher crashes solved.
Camera freezing issue solved
USB mount working!
Updated CM 10 sources.
Removed File manager. Download your favorite one from the market.

Change Log V 2:

FULL WIPE IS REQUIRED BEFORE FLASHING.
Updated CM sources.
Now updated to 4.1.2
All camera funtions (zoom, video. Panorama ) now work.
Gtalk video works
Launcher changed to Trebuchet
Nexus 7 Fingerprint.
FileManager Added.
Holo Notes Added.
Very smooth and stable.

Change Log V 3:

Updated CM sources.
New CM 10 File Manager
Android 4.2 Keyboard with gesture typing
Android 4.2 Deskclock
Added new init.d tweaks.
Smooth and stable.

Change Log V 4:

Runs on new KERNEL!
Updated CM 10 sources
Changed from early dump 4.2 keyboard to final 4.2 keyboard.
LatineIME moved back as system app.

Source

Tagged with

4.1 android devs google install jellybean on funbook jellybean micromax funbook Micromax Funbook (P300) mmx mmx fb mxfb play update

Pingback: List of all the Custom ROMs available for Micromax Funbook
http://www.facebook.com/cbchawla Chetan Chawla

Ohh Yuppie .. Installed
Working Awsome!!
Thank You So Much Foh SharIng ….
Thankz Cyanogenmod
- http://www.stupidtechie.net/ Ujjwal Kumar
  
  Enjoy!
Navjot

Can i install this on funbook pro???
- http://www.stupidtechie.net Ujjwal Kumar
  
  No. But if you wait for one or two days I will share a method to get JellyBean on Funbook Pro.
  - Ashish
    
    Can you please share the way to install it on Funbbok Pro, will it resolve the issues persisting with the existing OS?
    - http://www.stupidtechie.net/ Ujjwal Kumar
      
      Here you go: http://www.droidextra.org/2012/10/25/install-android-4-1-jellybean-on-micromax-funbook-pro-p500.html
  - ashwani
    
    can i do this in funbook infinity ????
    - http://www.stupidtechie.net/ Ujjwal Kumar
      
      No.
http://www.facebook.com/tarangs20 Tarang Shah

wifi doesn’t work
- http://www.stupidtechie.net/ Ujjwal Kumar
  
  Everything is working fine. Please use the options properly.
  - ashwani
    
    hey ujjwal everything is fine for me except the hd videos all are not playing well and at ics all were played flowless
    - http://www.stupidtechie.net/ Ujjwal Kumar
      
      Yes that is a known bug. I hope that the dev will try to remove it.
      I will update if there is anything new. You can like our Facebook page and subscribe to the email feeds to get updated.
      - Waris Butt
        
        Dear admin can i install this ROM on my funbook talk p350. is there any rom for it. can you please suggest me?
      - http://www.stupidtechie.net/ Ujjwal Kumar
        
        No. It will not work correctly on P350.
prakash

Hi, everything worked for me, except the last 2nd step

Now choose “Install ZIP from SD card” and choose the “CyanBook_JB_Beta1.zip”. Let it install.

AFTER CHOOSING THIS ZIP FILE “CyanBook_JB_V2.zip”

installation started after some time

installation aborted with error

“symlink: some symlinks failed
E: Erroe in /sdcard/cyanbook_JB_V2.zip
(Status 7)
Installation aborted”

pls help me on this error message.
- http://www.stupidtechie.net/ Ujjwal Kumar
  
  That’s weird. Because It installed perfectly for me. Please download it again and try.
  - prakash
    
    Hi Ujjwal,
    
    Thank you for reply,
    
    The downloaded zip file is corrupt
    
    “CRC failed in systemliblibvorbisidec.so. The file is corrupt”
    - http://www.stupidtechie.net/ Ujjwal Kumar
      
      That is why I asked you to download again. Have fun.
      - prakash
        
        Hi Ujjwal,
        
        I download the file once again(3rd time) still the zip file is corrupt,
        
        can you download the file by yourself & try to extract the zip file to the folder & confirm me back, if it worked for you.
      - http://www.stupidtechie.net/ Ujjwal Kumar
        
        Downloaded and its ok for me. Please check your internet connection.
      - prakash
        
        ok, i think my internet connection is slow(64Mbps)
        
        1 help, can you download this file & re-upload in Mediafire & share me the link( new link)
      - http://www.stupidtechie.net/ Ujjwal Kumar
        
        What ISP in India is giving you 64 MBPS?! I still think its your ISP because my 3 MBPS connection downloaded it without any difficulty.
      - prakash
        
        sorry man if i had hurt you,
        
        I’m working in MNC company it has 400Mbpsx2, but i get 64Mbps speed,
        
        for you info ISP is Airtel & Tata & Reliance.
        
        do not bring my India & I don’t know why you are going out of topic,
        
        if u do not know about India pls do not talk about India,
        
        India has very thing, but nobody know it.
      - http://www.stupidtechie.net/ Ujjwal Kumar
        
        Great. Anyways, just download it again. The ZIP is healthy.
Siva

Now in this version all the bugs are fixed or srill any bugs and crashes are present ?
- http://www.stupidtechie.net/ Ujjwal Kumar
  
  Only a few minor bugs.
Sudhir

hi,
cyanogenmod has released the stable version of JB, but i am not able to understand with one to download and can you please help on this.
thanks in advance..
Sudhir
Ahbab

Hi! I installed Android 4.1 JellyBean on my funbook and it worket fine for me. But I have some problems. Tata Photon Plus Dongle is not working and every time I tap on Status in About Tablet, it stops working! Please help me. Thanks
- http://www.stupidtechie.net/ Ujjwal Kumar
  
  It will not work with this ROM.
http://www.stupidtechie.net/ Ujjwal Kumar

The amount of RAM shown is usable by other apps and the rest of it by Android System.
http://profile.yahoo.com/MQA4JIKVLY4A2KOF75OFH36CPY Bumsen

Looks like its not worth upgrading to this ROM
- http://www.stupidtechie.net/ Ujjwal Kumar
  
  I’m using this as my b primary ROM. Rest is up to you.
sankar

in my home there is no signal of tatapoton + after update all dongals support
- http://www.stupidtechie.net/ Ujjwal Kumar
  
  This ROM doesn’t support Tata Photon+.
Edy

Hello… I have downloaded the Zip files and loaded it in SD card… After “Wipe data/factory reset“… where do i find this “Advanced > Wipe Dalvik Cache.”Plz reply ASAP…

Regards,
Edy
- http://www.stupidtechie.net/ Ujjwal Kumar
  
  In clockworkmod options.
Edy

Hello… Appreciate your quick response…. Now press 1 and CWM Recovery 5 will install without any problem… after this I get an error message as “Remount Failed: Operation Not Permitted…Failed to copy Recovery.img to /data/recovery.img… I’m sure i’m in Administrator Log-In on my Computer….
Please Reply what to do now… If you’ve any chat id, kindly request you to share the same….

Regards,
Edy
Edy

This Step Really Makes me to loose my patience….Now choose “Install ZIP from SD card” and choose the “CyanBook_JB_Beta1.zip”. Let it install… When i try this.. it says E:Signature Verification Failed…Installation Aborted…

Please Suggest….

Regards,
Edy
- http://www.stupidtechie.net/ Ujjwal Kumar
  
  You just have to toggle signature verification.
  - Edy
    
    Hello,
    
    I have Installed JB succesfully…But When I search for a Wifi spot, it shows my wifi connection but cant see a virtual keyboard on the screen???? Plz Help…
    
    Regards,
    Edy
    - http://www.stupidtechie.net/ Ujjwal Kumar
      
      Not getting you. Please explain properly.
  - Pallab Patra
    
    how to verify the signature
    - http://www.droidextra.org/ Ujjwal Kumar
      
      Toggle signature verification in CWM.
wastefellow

i cant understand the last four paragraph what is ment by change logv1 v2 v3.
- http://www.stupidtechie.net/ Ujjwal Kumar
  
  That is a log which shows what improvements and changes have been made since version 1.
- ashwani
  
  these all are line by line updates of clockworkmod….
http://www.facebook.com/dmushahid Daniyal Mushahid

what is clockworkmod?
- http://www.stupidtechie.net/ Ujjwal Kumar
  
  Search your question on our blog using the search bar. We have 2 posts on this.
Manas Kumar

whenever i m trying manual recovery mode it says ..more than one device or emulator …plz help me ..and my boot menu showing chinse letters so ….plz help me
- http://www.stupidtechie.net/ Ujjwal Kumar
  
  Your question is not clear. Explain properly.
Manas Kumar

Hello Ujjwal…
i Install Android 4.1 JellyBean (Stable v4) on Micromax Funbook talk …but i m not able call and not able to use internet through my SIM …so i want to change it to my origianal rom …this install Mathod was for Funbook p300 but mine is funbook talk P350…So plz help me to get back mobile as it was at purchasing tim ..i mean Need Original Rom for funbook talk P350…please reply soon…
- http://www.stupidtechie.net/ Ujjwal Kumar
  
  It is clearly mentioned that this is a ROM for P300.
anix

hi , i just happen to install jelly bean on my micromax funbook and it worked fine for 2days… on 2nd day i left my funbook in on mode for few hrs and then i think its battery drained out .. not it shows a warning message when it power on with battery symbol and it dont event start.. not even able to charge it .. any idea what i would be or how can i recover and suggestions or guesses would help me in exploring the issue .. thanks
- http://www.stupidtechie.net/ Ujjwal Kumar
  
  Something is wrong with the battery. It is not related to this ROM. Take it to the service center.
- demkeep
  
  keep it connected to pc for a few hrs
http://www.stupidtechie.net/ Ujjwal Kumar

It will be fixed by the dev in future versions.
Gaurav

The installation went fine. But it freezes every now and then now, and only option is to reboot it always. Is there some solution to this?
- http://www.stupidtechie.net/ Ujjwal Kumar
  
  It works properly on my tab. Please follow the instructions carefully.
- TAK
  
  same problem for me. kindly let me know if you find any solution ?
  - Gaurav
    
    I reinstalled…and it is better now…i would say 4.0.3 was working better than this one (JB)
Antony

Thanks The installation went well.
TAK

Installed without any issue .after booting it freezes every now and then now, and only option is to reboot it always.can some help
saksham

can I install it in my funbook p250
- http://www.droidextra.org/ Ujjwal Kumar
  
  No.
  - zafar
    
    mein kar liya to
    - http://www.droidextra.org/ Ujjwal Kumar
      
      Kar liya to uske baad don’t come back crying to me for help
prithviraj singh

hey! ujjwal help me work my photon dongle on it yar?
- http://www.droidextra.org/ Ujjwal Kumar
  
  It will not work on this ROM.
http://www.facebook.com/amitkumarswami Amit Kumar Swami

hey bro? tell me some supported dongle… will mmx352g work after flashing?
- http://www.droidextra.org/ Ujjwal Kumar
  
  No. It will not work.
http://www.facebook.com/amitkumarswami Amit Kumar Swami

can i use my external Bluetooth Dongle for internet ?
raj

can i use idea net setter e1732
Deepak

can i install it on funbook talk and also yaar agar mujhe vaapas pehle jaisa karna hai tab kya karun
- http://www.droidextra.org/ Ujjwal Kumar
  
  No. It may brick your device. This is only for P300.
raj

how to install cwm 5 recovery in p300
- http://www.droidextra.org/ Ujjwal Kumar
  
  Link is already in the post.
Hari Shankar

Can I Install it in Micromax Funbook Infinity P275??

HariShankar.
- http://www.droidextra.org/ Ujjwal Kumar
  
  No.
avishek

it is awsome
Did it and it is really working fine..
prithviraj

Please give me a way to run photon + on it yar
- http://www.droidextra.org/ Ujjwal Kumar
  
  Doesn’t work on this ROM.
http://www.droidextra.org/ Ujjwal Kumar

No.
- Dhiren Tripathy
  
  yup bro u can but u have to first root your device , and then search it from google , that how reverse tether on android 4.0 .
http://www.facebook.com/suhagkmaru Suhag Maru

after updating to cwm i cant tilt in temple run !!!!! why?
zafar

plz tell me a method to root my funbook p250 alpha
satya

I have updated my funbook p300 with this rom… but there is no filemanager,,
Can u please help me out bro…
- http://www.droidextra.org/ Ujjwal Kumar
  
  Download one from Play Store.